Epoxy Quartz Seamless Flooring Installation by Double Broadcast Method - Epoxy.com Product #15

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy Quartz Seamless Flooring

Double Broadcast Installation Method, Epoxy.com Product #15


The procedure for installing a double broadcast Epoxy.com Product #15 as a Seamless Epoxy Color Quartz Flooring System over concrete is very simple:

  1. Properly prepare the substrate www.epoxy.com/surfaceprep.aspx.   You cannot have a quality installation of Epoxy Seamless Flooring without quality surface preparation.
  2. Primer:
    1. If you cannot remove all the oil, use Epoxy.com Product #201  www.epoxy.com/201.htm - Oil Stop Primer.  Apply at a rate of 200-320 SF per gallon.  Allow to cure overnight.
    2. If you have a  moisture vapor transmission Problems, use Epoxy.com Product #830 www.epoxy.com/830.aspx - Anti-Moisture Primer at a rate of applied in a single coat of 12 mils (130 sq ft. per gallon) when relative humidity readings are below 95% or MVT readings are below 12# per 1000 sq ft./24 hrs. Higher readings require consultation with Epoxy.com Technical Services and may require a second coat of Epoxy.com Product #830 of 10 mils (160 sq ft. per gallon).Allow to cure overnight.
    3. For general purpose primer you can use Epoxy.com Product #15 at a rate of 250 SF per gallon. Allow to cure overnight.
  3. Mixing small batches at a time apply Epoxy.com Product #15 Seamless Epoxy Quartz Flooring Resin at a rate of 100 sq ft per gallon.  Broadcast the Product #15 Seamless Epoxy Quart Flooring Resin with Epoxy.com Product #68 Seamless Epoxy Flooring Colored Quartz Aggregate - http://www.epoxy.com/68.htm -to saturation immediately at the end of each batch.  This will require about 0.4 lbs of Epoxy.com Seamless Epoxy Flooring Colored Quartz Aggregate per SF. Be sure to leave a wet edge to roll the next batch up against.  Continue this as you work your way across the floor.  Allow to cure 6-8 hours (typically overnight).
  4. Sweep and vacuum off all loose Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate. Mix small batches of Epoxy.com Product #15 Seamless Clear Epoxy Quartz Flooring Resin and apply it with Squeegee at a rate of 80-90 SF per gallon.  Broadcasting immediately after each batch with Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate - http://www.epoxy.com/68.htm -to saturation at the end of each batch.  This will require about 0.5 of Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate per SF. Be sure to leave a wet edge to roll the next batch up against.  Continue this as you work your way across the floor.  Allow to cure 6-8 hours (typically overnight).
  5. Sweep and vacuum off all loose Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate. Mix small batches of Epoxy.com Product #15 Clear Epoxy Seamless Flooring Resin and apply it with Squeegee at a rate of 80-90 SF per gallon.   Continue this as you work your way across the floor.  Allow to cure 6-8 hours (typically overnight).
  6. If a smoother surface is required you can add addition coat(s) of Epoxy.com Product #15 Seamless  Clear Epoxy Flooring Resin, or optionally Epoxy.com Product #402 -www.epoxy.com/402.htm - 2-Component Chemical Resistant Aliphatic Polyurethane Seamless Flooring Resin with a roller.

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - 35 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks

Copyright © 1994-2015 - Epoxy Systems Inc. DBA Epoxy.com  - Commercial, Industrial, and Residential Resins Since 1980

/