Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Acrylic Sealer

A Clear, non-yellowing protective coating

Epoxy.com Product #80


DESCRIPTION

ACRYLIC SEALER Product #80 (formerly known as Epoxy.com Product #239) is a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Product #80 ACRYLIC SEALER provides a tough, UV and abrasion resistant film that effectively protects surfaces from moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to clean and maintain, Epoxy.com  Product #80 ACRYLIC SEALER is an excellent choice for both interior and exterior applications.

Epoxy.com  Product #80 ACRYLIC SEALER is most commonly used as a sealer for Epoxy.com Epoxy Terrazzo and Epoxy.com Polymeric Terrazzo flooring systems. It is also used for sealing old and new concrete floors, Concrete Countertops, exterior ramps, decks, sidewalks, slate, and exposed aggregate surfaces.

ADVANTAGES

  • UV resistant
  • Excellent clarity and color retention
  • Low maintenance finish
  • Excellent abrasion and mar resistance
  • Seals substrate from moisture penetration

CONSIDERATIONS

  • Do not apply below 50°F
  • Contains solvent. Keep from ignition sources
  • Must be applied with proper ventilation

APPLICATION

SURFACE PREPARATION

Prepare surface in accordance with Epoxy.com, Technical Bulletins. New concrete must be cured at least 30 days. All concrete curing compound must be mechanically removed, along with any foreign material Old concrete must be structurally sound and prepped according to guidelines.

MIXING INSTRUCTIONS

Epoxy.com  Product #80 ACRYLIC SEALER is a single component acrylic solution. Stir material in container prior to application. Do not reduce.

INSTALLATION

Apply by roller, brush, or applicator pad. Spread at an even rate between 300 and 500 square feet per gallon. Two coats are recommended for sealing applications.

CURE

Re-coat in 2 to 4 hours at 700F with 50% RH. Low temperatures or high humidity may significantly increase cure time. Do not open to light traffic for at least 24 hours after application

CLEAN-UP

Clean tools with Xylene or lacquer thinner.

TECHNICAL DATA

Color Clear
Mixing Ratio, by volume Single Component
Solids Content, by volume 20%
VOC 746 g/L
Weight per Gallon, mixed 7.5-8.0 pounds

MAINTENANCE

After completing the application of Epoxy.com  Product #80 ACRYLIC SEALER, the installer should provide the owner with maintenance instructions. If floors become slippery due to animal fats, oil, grease, or soap film, promptly remove contaminants and rinse thoroughly.

Epoxy.com  Product #80 ACRYLIC SEALER is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture. Waxing is optional. Long periods of heavy traffic may cause wear patterns necessitating a maintenance application of a finish coat.

TECHNICAL SERVICE

Epoxy.com, Inc. provides services and consultations on material selection, specification, troubleshooting, and other information on the proper repair and protection of concrete surfaces.Epoxy.com REPRESENTATIVES are available to assist you at 352-533-2167

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - 35 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks

Copyright © 1994-2015 - Epoxy Systems Inc. DBA Epoxy.com  - Commercial, Industrial, and Residential Resins Since 1980

/